Process
1. Die (Pattern/Tool) is manufactured using the latest CAD/CAM facilities.
2. W Technocast provides technical support to its customer to develop cost-saving and efficient products.
3. Injection and production of wax pattern from the die all wax patterns are 100% inspected.
4. The wax pattern after forming the tree of cluster undergoes the ceramic coating process this process is done in temperature and humidity controlled rooms so that the best dimensional accuracy and excellent surface finish is achieved.
5. After completing the coating process, the wax is removed by the De-waxing process, which is done by putting the ceramic mold in the autoclave.
6. The ceramic molds are baked at temperature ranging from 900º C to 1200º C depending on the geometry and size of the casting. The molten metal is then poured in backed ceramic moulds.
7. The casting then undergoes fettling and finishing process such as gate cutting, gate machining and grinding Sand blasting, shot blasting, leaching, and deburring etc.
8. The Casting then undergoes the heat treatment as per the material specifications.
9. Heat treatment graphs and cycles are recorded and documented.
10. Heat treatment furnace is calibrated and certified under third party witness.
11. All casting are subjected to 100% visual inspection and all critical dimensions are 100% inspected before Packing and shipment
12. W Technocast also supply casting in Machined Condition.
PRODUCTS
- Automotive
- Aerospace
- Power Plants
- Pumps
- Boiler and turbines Parts
- Valves
- Pipe Fitting
- General Engineering
- Fire Fitting
PROCESS
ADDRESS
Plot no D8 to 16,
Shivam Industrial park,
Kalawad road Village Chapra,
Ta, Lodhika, Gujarat 360021
Phone: +91 70693 99000
Phone: +91 99099 99000
Email: info@wtechnocast.com